Fujifilm X-Pro2 Body Only

fujifilm-x-pro-2-main.jpg
fujifilm-x-pro2-back.jpg
fujifilm-x-pro2-front.jpg
fujifilm-x-pro-2-main.jpg
fujifilm-x-pro2-back.jpg
fujifilm-x-pro2-front.jpg
sale

Fujifilm X-Pro2 Body Only

1,549.95 1,699.95

Features

  • 24.3MP APS-C X-Trans CMOS III Sensor
  • X-Processor Pro Engine
  • Advanced Hybrid Multi Viewfinder
  • 3.0" 1.62m-Dot LCD Monitor
  • Full HD 1080p Video Recording at 60 fps
  • Built-In Wi-Fi, SHARE Printer Compatible
  • 273-Point AF with 77 Phase-Detect Points
  • Up to 8 fps Shooting and ISO 51200
  • Weather-Sealed Design, 2x SD Card Slots
  • Film Simulation and Grain Effect Modes
Add To Cart

Image Quality
As a film manufacturer, Fujifilm has conducted exhaustive research into delivering photo quality results for more than 80 years. Without this experience, it would have been impossible to come up with the technical capability to reproduce colors and tones that emphasise the texture of the subject and deliver a three-dimensional look to images. The creative attributes of film that cannot be measured by resolution alone are alive and well in the FUJIFILM X-Pro2.

New X-Trans CMOS III
The first model to feature a newly-developed sensor for outstanding image quality
The newly-developed 24.3MP X-Trans CMOS III APS-C sensor boasts the highest ever pixel count for an X-Series camera. Combined with an XF lens, it delivers images with a perceived resolution far greater than the number of pixels used. In addition, the phase detection pixels have been positioned over a larger area for a faster, more precise phase detection AF performance. High ISO sensitivity performance has also been improved to the point that the whole sensitivity range — up to the maximum ISO 12,800 (Extended output sensitivity up to 51,200) — can now be used with confidence.

New X Processor Pro
New processing engine increases speed and image processing capabilities
Thanks to the newly-developed X-Processor Pro engine, processing speeds are now approximately four times faster than a conventional model. This maximizes the capabilities of the X-Trans CMOS III sensor to ensure it delivers the highest image quality with super-fast response times. In addition, thanks to the high-speed reading technology of the sensor, the conventional EVF's display speed of 54fps has been increased to a maximum of 85fps*. This substantially reduces the image delay phenomenon when tracking a moving subject. Blackout time after release has also been reduced by approximately half and compressed RAW is supported, improving the ease-of-handling of RAW data. 
The FUJIFILM X-Pro2 features a new CPU for high-speed processing. The Buffer memory has also been increased for an even faster response.

Advanced Hybrid Multi Viewfinder
Compose images in the viewfinder using one of three different viewing options
Photographers love looking through a viewfinder to take photos, which is why X-Series models have used finders from the very start. Combining the advantages of both an OVF and an EVF, Fujifilm has perfected the Advanced Hybrid Multi Viewfinder with three viewing options. Now you can return to the roots of photography with the only viewfinder of its kind in the world.

Simple & Highly functional. Advanced hybrid multi viewfinder.
OVF/EVF switch lever
The advanced hybrid multi viewfinder allows you to switch between optical and electronic options with a single lever. The new electronic rangefinder feature is selected in the same way.

Electronic Rangefinder (ERF) simultaneously displays a small EVF window in the optical viewfinder.
The EVF is simultaneously displayed as a small window in the optical viewfinder. It can be displayed in three different ways: 100% field of view, 2.5x magnification and 6x magnification. This allows the user to check focus, the angle-of-view, exposure and white balance in real-time, even when taking photos through the OVF. As it can also be used with MF assist, precise MF is possible in the OVF mode.

Depth of Field Preview
The Depth of Field Scale can be selected for film reference display in addition to conventional pixel reference. With film reference, photo viewing from printing becomes a prerequisite for depth display, allowing the user to use it in a sense of depth of field similar to film photos.

Focusing system combines fast and accurate AF with simple MF
Accentuate your subject. For photographers, focusing is an important job. Although AF now reacts faster than the human eye, the appeal and level of trust in MF will never disappear. Manually operating the focus ring to pick out a specific element in the frame is often crucial. Speed isn't always everything.

Focus Lever allows you to instantly change the focus area
The new Focus Lever on the back of the camera can be moved like a joystick in eight directions to instantly move the focus area. Now, rapid focus area changes can be made, even when composing an image. Not only is this available to move the AF point during AF mode, but it can also be used during MF mode to quickly move the enlarged display area when using MF assist.

Color Digital Split Image
The FUJIFILM X-Pro2 comes equipped with different types of MF assist including Digital Split Image, which is reminiscent of old rangefinders, and Focus Peaking where color is used to show the parts of the image that are in focus.

Phase Detection AF area expanded to 7x7
The number of selectable focusing points has been expanded from 49 on previous models to 77. Approximately 40% of the imaging area is now covered by fast, precise phase detection AF pixels, which means focusing speeds when photographing moving subjects have improved dramatically.

A body design that maximizes practicality
No photographer wants to take their eye from the viewfinder for fear of missing the perfect shot. With this in mind, key design aspects have been concentrated on the camera's right side. The major exposure settings are available on a dial for quick fingertip control. Changes can also be made while the camera is switched off, so users will always be ready for the next photo opportunity. Thanks to the simplicity of the FUJIFILM X-Pro2, you'll soon be creating masterpieces.

Exposure compensation dial in the C position
As it's used so frequently, exposure compensation has been made into a dual-purpose dial. Compensation up ±3 stops in 1/3 steps is possible even with the camera to your eye thanks to the dial's knurled shape. But if the C position is selected, exposure compensation of up to ±5 stops is possible using the front command dial.

One dial for both ISO and shutter speed
The shutter speed and ISO dials have now been combined into one dial, which is reminiscent of those found on old film cameras. Changing the ISO is done by lifting the outer portion of the dial. Now all exposure settings can be performed with dials.

Front Command Dial for more comfortable handling
The FUJIFILM X-Pro2 features a new front command dial. It is used to set intermediate shutter speeds that are not available on the shutter speed dial when shooting in Manual or Shutter Speed Priority modes. It's also used to shift programmed exposure combinations when shooting in Program mode.

Tough conditions are no longer to be feared. The FUJIFILM X-Pro2 can be relied upon to take a picture at any time in any conditions.
Reliability is one of the most important considerations when choosing a camera, so the FUJIFILM X-Pro2 needs to work at any moment, regardless of where you are and what type of scene you want to photograph. That's why the camera body is made from magnesium and features a dust-proof, splash-proof and freezeproof structure, along with a highly durable focal plane shutter and dual card slot.

Durable magnesium body
Coated in the same semi-gloss paint as the X-Pro1, the luxurious body of this new flagship model is made from highly robust magnesium alloy, which feels both solid and reliable in the hand. The dials are milled from aluminum and operating with a re-assuring click. In addition, the FUJIFILM X-Pro2 has many pre-requisites of a professional camera, including dust-resistance, water-resistance and the ability to work in low-temperatures thanks to the 61 weatherproof seals around the body. Shoot with confidence, no matter what the weather.

Dual SD Card Slots
The FUJIFILM X-Pro2 is the first mirrorless camera to offer dual SD card slots for highly reliable data storage. Slot 1 is compatible with UHS-II standards for excellent write speeds. One of three recording methods can be selected: sequential, backup and RAW / JPEG sorting.

Focal plane shutter with a maximum speed of 1/8000 sec.
Share every moment via email and SNS with easy wireless transfer to your smartphone.

For easy wireless transfer of photos to your smartphone or tablet just download the free dedicated "FUJIFILM Camera Remote" application to your device. There's no need to enter an ID, password or to change other troublesome settings; with just a touch of a button, you can transfer your high-quality images to your phone or tablet ready to upload to your blog or social networking site.
The FUJIFILM X-Pro2 comes equipped with a focal plane shutter boasting a durability of 150,000 shots, a maximum speed of 1/8000 sec and a flash sync speed of 1/250sec. Furthermore, the camera also includes an electronic shutter with completely silent operation and a maximum speed of 1/32,000 sec, allowing users to select maximum apertures even in bright conditions.