 |
 |
 |
|
| E2, the highest purity Tin Oxide sensor cleaner, is now available, containing less than 5 parts per million (ppm) of contamination (the whitish residue left after evaporation) It dries as quickly as it can be applied leaving absolutely no visible residue, making it the only recommended cleaner for Indium Tin Oxide coated CCD and CMOS sensor cleaning when used with Sensor Swabs |
|
|
|
|
|
 |
|
 |
|
Features
- Dispense several drops onto new Sensor Swab. With one side of the swab, firmly drag it across the sensor. Repeat in opposite direction using the clean side of swab. Discard swab. Repeat if necessary with new swab.
|
|
|
 |
|
 |
|
|
|
